Centrifugal Pump Application
Centrifugal single impeller low head water pumps for flow irrigation systems with high flow rate.
Suitable to pump clean water or non-aggressive liquid charged with small solid impurity.
To be used in flow irrigation systems in gardening, agriculture and industrial fittings.
Operating conditions
*Liquid temperature up to 60
*Ambient temperature up to 40
*Total suction lift up to 9mt.
*Continuous duty
Motor
*Two-pole induction motor(n=2850r. P. M)
*Insulation Class B
*Protection IP44
Material
*Pump body: Cast iron
*Motor support: Cast iron, Aluminum for CPM-2 and HCT-S
*Motor housing: Aluminum, Cast iron for HPN
*Impeller: Brass, PPO for HMC-S, AISI 304 SS for HMCS-S
*Shaft with rotor: 45#steel, AISI 416 stainless steel if request
*Mechanical seal: Carbon/Ceramic
Single phase 220V-240V/50Hz
Single phase 110V-127V/60Hz if request
Single/three phase 220V/60Hz if request
NO. |
TYPE |
POWER |
MAX.FLOW |
MAX.HEAD |
INLET/OUTLET |
MAX.SUCT |
N.W |
PACKING DIMENSION |
(Kw) |
(Hp) |
(L/min) |
(m) |
(Inch) |
(m) |
(K.g) |
(mm) |
A |
HCPF-60 |
1.1 |
1.5 |
450 |
20 |
2"*2" |
9 |
22 |
395*235*315 |
B |
HCPF-70 |
1.5 |
2 |
450 |
25 |
2"*2" |
9 |
23.5 |
395*235*315 |
C |
HCPF-80 |
2.2 |
3 |
500 |
30 |
2"*2" |
9 |
28 |
410*230*310 |